|
We are delighted to be able to offer our new, all-inclusive, Plasma & LCD TV installation service for Liverpool, Wirral, Warrington and Widnes. Our courteous and professional installers have over 5 years experience within the TV Wall bracket market and are fully equipped with all the necessary tools required to complete the job with as little fuss and mess as possible. No job is too small and if you want any advice regarding the positioning of your TV or wall mounting your Sky box, DVD player and other AV equipment, then please do not hesitate to ask. We will not be happy until you are completely satisfied with our service and our specially equipped vehicle is stocked with a range of additional brackets, scart leads and hdmi cables to ensure that you are able to achieve your desired finish. Installation Charges Up to 30" TV's - £50.00 including standard flat wall bracket
Larger than 30" TV's - £75.00 including standard flat wall bracket
Non-Standard or bespoke installations including hiding wires - £POA Please note that installation does not include any cable management solution: we can provide cable management solutions at an additional cost (in other words we dont hide the wires unless you ask us to in advance and we can provide you with a quote!) Installation Coverage Our TV Installation Service covers Liverpool, Wirral, Widnes and Warrington.
Please see the map below for areas that we are currently able to offer our installation service.
If you are just outside the shaded area, we may still be able to install for you, please give us a call to enquire about availability and cost. Some examples of our work Check out more examples of our work at our new installation website by clicking here Mrs A Install - 42" Philips Ambilight TV as close to the wall as possible with no wires on show. | | Mrs A wanted her new 42" Philips Ambilight TV mounted on the chimney breast and hated the thought of having to see wires sticking out everywhere. 1/ Our first task was to attach the backplate of the bracket to the wall, ensuring that it is level. 2/ As we were attaching to a hollow chimney breast we utilised this space by drilling a hole into the space through which we could run the power cables, scart leads and HDMI cables from the TV to the Sky+ box, DVD player and PS3.
|  | Mrs A was positioning her Audio Visual equipment on one of our black glass tv stands, which we also installed for her, to the right of the TV. 1/ We pulled out the fuse spare for her fire in order to check the way was clear for our leads. 2/ Below this we used a white plaster back box that we slightly modified, to pull the component leads through, giving a really clean finish |  | The point at which the leads exited the wall was then covered using a clean white faceplate. The finishing touches are then added, ensuring the new Philips Ambilight Screen is level and fully functioning. We tidy as we go and will give a quick once over with our vaccuum before we leave. |
Mr & Mrs C Install - LCD TV installed on the wall above a fire with hidden wires in the wall |  | Mr & Mrs C had decorated their living room and decided to move the mirror from above the fireplace and put the tv in its place. Here you can see the false chimney breast (minus the mirror) where they wanted the tv to be as flat as possible. Their Sky+ box and dvd player were to be siuated to the bottom left of the fireplace on the unit that they are currently using for the TV. As with many customers they hadn't considered what they would do with all the wires once the Tv was on the wall, so a quick investigation revealed a plasterboard wall with a small cavity before a more substantial Aerated breeze block wall. We suggested hiding the wires within the wall without ruining their decor.
|  | Here you can see our installer fixing the bolts that will later be used to secure the Wall Bracket.
He used one of our specialist Plasterboard Wall fixing kits to give a strong secure fixing to the plasterboard. |  | Once the Wall bracket is levelled and secured, he then cuts a small section out of the plasterboard (making sure it will later be covered by the TV!) through which he feeds the power cables for the TV, Scart lead and HDMI cables required for the Sky+ box and DVd player that will be connected. |  | He then finishes off the hole in the plasterboard wall with a modified white back box and faceplate in order to achieve a really clean finish. |  | At the point in the wall where the leads and cables were to exit, another small hole is cut. |  | A special 'fishing' tool is used to guide the wires and leads from the entrance point below the tv Wall bracket down to the exit point. |  | Another white plasterboard back box and wall plate are used to achieve a really clean finish. |  | And here is the finished look, a really clean and showroom style finish with the minimum of fuss and disruption. |
Case Study 1 | | Mounting an LCD TV in a dining room 1/ Ensure the bracket is level |  | Specialist Rigifix bolts ensure a strong and safe fit to the wall. |  | Outside the house we prepare to bring the wires out from behind the screen. |  | The specialist HILTI tools guarantee a professional finish |  | Creating the entry point for the wires to go back into the room. |  | Waterproof trunking guarantees the integrity of the cabling. |  | The cabling is now fished through the conduit and out into a backbox which will be hidden by the TV once on the bracket. |  | A cover plate creates a neat and professional finish |  | The leads that will be connected to the screen, remember the white cover plate will not be seen once the TV is mounted on the bracket. |  | At the skirting board you can see the hole on the right where we will pull the wires out, we have also taken the power socket out to create a neat installation for the power, it is in the process of being tested. |  | The power socket now has a really neat and clean finish |  | Again we cover the exit point for the wires with a neat wallplate. |  | The finished installation looks neat and tidy with no mess. |
|
